This is the question we hear most from prospective operators. The honest answer is: you need drainage, but you do not need a fixed water supply. Here is exactly what our station requires.
How a self-contained system works
Our station has a 40 L fresh-water tank for washing and rinsing. There is no waste tank: everything that drains from the cabin passes through the drain module straight into the building drainage, which is why a 110 mm drain connection is required.
The 40 L fresh-water tank refills in a couple of minutes and covers a run of washes before topping up; how many depends on dog size and programme length.
Three installation options
1. The short answer
Our standard station needs drainage but not a fixed water supply. It has a 40 L fresh-water tank you refill, and it has no waste-water tank — so the waste must go to a drain.
2. What the drain connection looks like
The unit has a drain module measuring 150 × 300 mm and takes a 110 mm drain pipe. In most retail units this means tapping into an existing floor drain or soil stack — usually a single visit from a plumber.
3. Water supply
Where a fixed tap is nearby, plumbing the fresh-water inlet to it saves refilling by hand. Without one, refilling the 40 L tank from a hose or container is straightforward.
What you always need
- A level, load-bearing floor of about 1.35 × 1.40 m (280 kg loaded)
- A dedicated electrical circuit — about 12 kW, sized by a qualified electrician
- A 110 mm drain connection — the unit has no waste-water tank
- Roughly 1 m of clearance in front of the door
- A way to refill the 40 L fresh-water tank
If you are not sure which setup fits your space, send us a photo of the room — we will tell you what would work.