Do I Need Plumbing for a Self-Service Dog Wash Station?

Plumbing is optional. Here is how self-contained water and waste tanks work, plus the three installation setups from fully portable to fully plumbed.

This is the question we hear most from prospective operators. The honest answer is: you need drainage, but you do not need a fixed water supply. Here is exactly what our station requires.

How a self-contained system works

Our station has a 40 L fresh-water tank for washing and rinsing. There is no waste tank: everything that drains from the cabin passes through the drain module straight into the building drainage, which is why a 110 mm drain connection is required.

The 40 L fresh-water tank refills in a couple of minutes and covers a run of washes before topping up; how many depends on dog size and programme length.

Three installation options

1. The short answer

Our standard station needs drainage but not a fixed water supply. It has a 40 L fresh-water tank you refill, and it has no waste-water tank — so the waste must go to a drain.

2. What the drain connection looks like

The unit has a drain module measuring 150 × 300 mm and takes a 110 mm drain pipe. In most retail units this means tapping into an existing floor drain or soil stack — usually a single visit from a plumber.

3. Water supply

Where a fixed tap is nearby, plumbing the fresh-water inlet to it saves refilling by hand. Without one, refilling the 40 L tank from a hose or container is straightforward.

What you always need

  • A level, load-bearing floor of about 1.35 × 1.40 m (280 kg loaded)
  • A dedicated electrical circuit — about 12 kW, sized by a qualified electrician
  • A 110 mm drain connection — the unit has no waste-water tank
  • Roughly 1 m of clearance in front of the door
  • A way to refill the 40 L fresh-water tank

If you are not sure which setup fits your space, send us a photo of the room — we will tell you what would work.